Central Bedfordshire Council Planning Pages

Conditions or Reasons for Planning Application - SB/03/01167

Conditions or Reasons:

1) The development shall begin not later than five years from the date of this permission.
REASON: To comply with Section 91 of the Town and Country Planning Act 1990.

2) The external finish of the walls and roofing materials to be used for the extension shall match that of the existing building as closely as possible.
REASON: To ensure that the development is in keeping with the existing building.
(Policies 10, B.S.P.; BE11, H9, S.B.L.P.; BE8, H8, S.B.L.P.F.R.D.).

3) Any garage or car port and any access thereto shall only be used for purposes incidental to the use of the dwelling for residential purposes and no trade or business shall be carried out therefrom.
REASON: To prevent the introduction of any commercial use.
(Policies BE11; S.B.L.P.; BE8 S.B.L.P.F.R.D.).

4) Before the access is brought into use, a triangular vision splay shall be provided on each side of it measuring 1.8m along the fence, wall, hedge or other means of definition of the front boundary of the site, and 1.8m into the site at right angles to the same line along the side of the new access drive. The vision splays so provided and on land under the applicant's control shall be kept free of any obstruction to visibility exceeding a height of 600mm above the adjoining footway level.
REASON: To provide adequate visibility between the existing highway and the proposed access and to make the access safe and convenient for the traffic which is likely to use it.
(Policies: T4 SBLP; T1 SBLPFRD)

5) Before the development is first occupied or brought into use, the proposed vehicular access shall be surfaced in tarmacadam or other similar durable material as may be approved in writing by the District Planning Authority for a distance of 6 metres into the site, measured from the highway boundary. Arrangements shall be made for surface water drainage from the site to be intercepted and disposed of separately so that it does not discharge into the highway.
REASON: To avoid the carriage of mud or other extraneous material or surface water from the site into the highway so as to safeguard the interest of highway safety.
(Policies T4 S.B.L.P.; T1 S.B.L.P.F.R.D.).

6) Notwithstanding the details shown on the submitted plan, the length of the driveway in front of the garage hereby permitted shall be a minimum of 6m as measured from the garage doors to the highway boundary.
REASON: To ensure that parked vehicles do not adversely affect the safety and convenience of road users by overhanging the adjoining public highway.
(Policies T4 S.B.L.P.; T1 S.B.L.P.F.R.D.).

7) This permission relates only to the details shown on Drawing No. 1180, Floor and Elevation Plan of garage and Site Location Plans received 07/07/03 or to any subsequent appropriately endorsed revised plan.
REASON: To identify the approved plan/s and to avoid doubt.

Return to Search | Close Window

Top of Page

Useful information