Central Bedfordshire Council Planning Pages

Conditions or Reasons for Planning Application - SB/04/00396

Conditions or Reasons:

1) The development shall begin not later than five years from the date of this permission.
REASON: To comply with Section 91 of the Town and Country Planning Act 1990.

2) Development shall not begin until details of the junction of the proposed vehicular access with the highway have been approved by the District Planning Authority and no building shall be occupied until the junction has been constructed in accordance with the approved details.
REASON: In order to minimise danger, obstruction and inconvenience to users of the highway and the premises.
(Policies 42 B.S.P & T1 S.B.L.P.R).

3) Before the access is first brought into use a triangular vision splay shall be provided on each side of the new access and shall measure 1.8m along the wall, or other means of definition of the front boundary of the site, and 1.8m measured into the site at right angles to the same line along the side of the new access drive. The vision splays so described and on land under the applicantżs control shall be maintained free of any obstruction to visibility exceeding a height of 600mm above the adjoining footway level.
REASON: To provide adequate visibility between the existing highway and the proposed access, and to make the access safe and convenient for the traffic which is likely to use it (them).
(Policies 42 B.S.P & T1 S.B.L.P.R)

4) The proposed vehicular access shall be surfaced in bituminous or other similar durable material as may be approved in writing by the District Planning Authority for a distance of 6m into the site, measured from the highway boundary, before the use of the access way. Arrangements shall be made for surface water drainage from the site to be intercepted and disposed of separately so that it does not discharge into the highway.
REASON: To avoid the carriage of mud or other extraneous material or surface water from the site into the highway so as to safeguard the interest of highway safety.
(Policies 42 B.S.P & T1 S.B.L.P.R).

5) This permission relates only to the details shown on Drawing No. 001 Rev A, 002 RevA, 003 Rev A, 004 Rev A the Site Location Plan and Block Plan received on 31/03/04 or to any subsequent appropriately endorsed revised plan.
REASON: To identify the approved plans and to avoid doubt.

Return to Search | Close Window

Top of Page

Useful information