Central Bedfordshire Council Planning Pages

Conditions or Reasons for Planning Application - MB/09/00349/FULL

Conditions or Reasons:

1) The development hereby approved shall be commenced within three years of the date of this permission.

Reason: To comply with Section 91 of the Town and Country Planning Act 1990 which is designed to ensure that a planning permission does not continue in existence indefinitely if the development to which it relates is not carried out.

2) The permission shall extend only to the application as amended by plans received by the Local Planning Authority on 23/3/09 .

Reason: For the avoidance of doubt and to ensure that the development is implemented in accordance with the plans formally approved by the Local Planning Authority.

2) Before the access is first brought into use a triangular vision splay shall be provided on each side of the new access and shall measure 1.8m along the fence, wall hedge or other means of definition of the front boundary of the site and 1.8m measured into the site at right angles to the same line along the side of the new access drive. The vision splays so described and on land under the applicant's control shall be maintained free of any obstruction to visibility exceeding a height of 600mm above the adjoining footway level.

Reason: To provide adequate visibility between the existing highway and the proposed access and to make the access safe and convenient for the traffic which is likely to use it.

3) Arrangements shall be made for surface water drainage from the site to be intercepted and disposed of separately so that it does not discharge into the highway.

Reason: To avoid the carriage of mud or other extraneous material or surface water from the site into the highway so as to safeguard the interest of highway safety.

4) The turning space for vehicles illustrated on the approved Plan (No 2339/28-Rev. C) shall be constructed before the development is first brought into use

Reason: To enable vehicles to draw off, park and turn outside the highway limits thereby avoiding the reversing of vehicles on to the highway.

Return to Search | Close Window

Top of Page

Useful information