Central Bedfordshire Council Planning Pages

Conditions or Reasons for Planning Application - CB/09/06321/FULL

Conditions or Reasons:

1) The development shall begin not later than three years from the date of this permission.
REASON: To comply with Section 91 of the Town and Country Planning Act 1990 as amended by Section 51 of the Planning and Compulsory Purchase Act 2004.

2) New external brickwork and roofing materials shall match those of the existing building as closely as possible.
REASON: To ensure that the development is in keeping with the existing building.
(Policies BE8 & H8 S.B.L.P.R).

3) Before development begins, a scheme for the parking of vehicles on the site shall be submitted to and approved in writing by the Local Planning Authority. The scheme shall comply with the standards of the Local Planning Authority and shall be fully implemented before the development is first occupied or brought into use and thereafter retained for this purpose.
REASON: To ensure provision for car parking clear of the highway.
(Policy T10 S.B.L.P.R).

4) Before the development is first occupied or brought into use a triangular vision splay shall be provided on each side of the new access and shall measure 1.8m along the fence, wall, hedge or other means of definition of the front boundary of the site, and 1.8m measured into the site at right angles to the same line along the side of the new access drive. The vision splays so described and on land under the applicant's control shall be maintained free of any obstruction to visibility exceeding a height of 600mm above the adjoining footway level.
REASON: To provide adequate visibility between the highway and the access, and to make the access safe and convenient for the traffic which is likely to use it.

5) Before the premises are occupied all on site vehicular areas shall be surfaced in a manner to the Local Planning Authority's approval so as to ensure satisfactory parking of vehicles outside highway limits. Arrangements shall be made for surface water from the site to be intercepted and disposed of separately so that it does not discharge into the highway.
REASON: In order to minimise danger, obstruction, and inconvenience to users of the highway and of the premises.

6) This permission relates only to the details shown on the Site Location Plan and Drawing No. 1 received 15/10/09 or to any subsequent appropriately endorsed revised plan.
REASON: To identify the approved plan and drawing and to avoid doubt.

Return to Search | Close Window

Top of Page

Useful information