Central Bedfordshire Council Planning Pages

Conditions or Reasons for Planning Application - SB/07/01469

Conditions or Reasons:

1) The development shall begin not later than three years from the date of this permission.
REASON: To comply with Section 91 of the Town and Country Planning Act 1990 as amended by Section 51 of the Planning and Compulsory Purchase Act 2004.

2) The external finish of the walls and roofing materials to be used for the extension shall match that of the existing building as closely as possible.
REASON: To ensure that the development is in keeping with the existing building.
(Policies BE8 & H8, S.B.L.P.R).

3) The study, garage and any access thereto shall only be used for purposes incidental to the use of the dwelling for residential purposes and no trade or business shall be carried out therefrom.
REASON: To prevent the introduction of any commercial use.
(Policy BE8, S.B.L.P.R).

4) The skylight in the south facing roofslope (shown shaded blue on Drawing No. 0709/4) shall be permanently glazed with obscured glass.
REASON: To protect the privacy of the occupiers of adjoining properties.
(Policies BE8 & H8, S.B.L.P.R).

5) Notwithstanding the provisions of the Town and Country Planning (General Permitted Development) Order 1995 (or any order revoking and re-enacting that Order with or without modification), no additional windows, dormer windows or roof lights shall be inserted into either flank elevation of the proposed garage.
REASON: To protect the amenity of neighbouring residents.

6) Notwithstanding the details shown on the approved plan, the floor level of the proposed garage shall be established and agreed in writing by the District Planning Authority before the development begins, in order to ensure that the ridge height of the new building is no higher in relation to adjoining properties than that of the garage to be demolished.
REASON: To protect the amenity of neighbouring residents.

7) This permission relates only to the details shown on Drawing No. 0709/4 received 17/12/07 or to any subsequent appropriately endorsed revised plan.
REASON: To identify the approved drawing and to avoid doubt.

Return to Search | Close Window

Top of Page

Useful information