<< Back to case
Conditions or Reasons for Planning Application - CB/15/01021/FULL
Conditions or Reasons:
1) The development hereby permitted shall begin not later than three years from the date of this permission.

Reason: To comply with Section 91 of the Town and Country Planning Act 1990 as amended by Section 51 of the Planning and Compulsory Purchase Act 2004.
2) Before the access is first brought into use, a triangular vision splay shall be provided on each side of the new access drive and shall be 2.8m measured along the back edge of the highway from the centre line of the anticipated vehicle path to a point 2.0m measured from the back edge of the highway into the site along the centre line of the anticipated vehicle path. The vision splay so described and on land under the applicant's control shall be maintained in perpetuity free of any obstruction to visibility exceeding a height of 600mm above the adjoining foot way level.

Reason: To provide adequate visibility between the existing highway and the proposed access, and to make the access safe and convenient for the traffic which is likely to use it.
(Policy BE8, SBLPR and Policies 25 & 43, DSCB)
3) The access hereby permitted shall not be brought into use until visibility splays have been provided at the junction of the access with the public highway. The minimum dimensions to provide the required splay lines shall be 2.2m measured along the centre line of the proposed access from its junction with the channel of the public highway and 43m measured from the centre line of the proposed access along the line of the channel of the public highway. The required vision splays shall be maintained thereafter free of any obstructions to visibility exceeding a height of 600mm above the adjoining footway level.

Reason: To provide adequate visibility between the existing highway and the proposed access, and to make the access safe and convenient for the traffic which is likely to use it.
(Policy BE8, SBLPR and Policies 25 & 43, DSCB)
4) The development hereby permitted shall not be carried out except in complete accordance with the details shown on the submitted plans, numbers CBC/001, CBC/003, CBC/004.

Reason: To identify the approved plans and to avoid doubt.


Return to Search | Close WindowTop of Page