Central Bedfordshire Council Planning Pages

Conditions or Reasons for Planning Application - CB/16/01095/FULL

Conditions or Reasons:

1) The development hereby permitted shall begin not later than three years from the date of this permission.

Reason: To comply with Section 91 of the Town and Country Planning Act 1990 as amended by Section 51 of the Planning and Compulsory Purchase Act 2004.

2) All external works hereby permitted shall be carried out in materials to match as closely as possible in colour, type and texture, those of the existing building.

Reason: To safeguard the appearance of the completed development by ensuring that the development hereby permitted is finished externally with materials to match the existing building in the interests of the visual amenities of the locality.
(Section 7, NPPF)

3) Before the new premises are occupied all on site vehicular areas shall be surfaced in a stable and durable material in accordance with details to be approved in writing by the Local Planning Authority. Arrangements shall be made for surface water drainage from the site to soakaway within the site so that it does not discharge into the highway or into the main drainage system.

Reason: To avoid the carriage of mud or other extraneous materials or surface water from the site so as to safeguard the interest of highway safety and reduce the risk of flooding and to minimise inconvenience to users of the premises and ensure satisfactory parking of vehicles outside highway limits.

4) Before the proposed development is first brought into use, a triangular vision splay shall be provided on each side of the new access drive and shall be 2.8m measured along the back edge of the highway from the centre line of the anticipated vehicle path to a point 2.0m measured from the back edge of the highway into the site along the centre line of the anticipated vehicle path. The vision splay so described and on land under the applicant's control shall be maintained in perpetuity free of any obstruction to visibility exceeding a height of 600mm above the adjoining foot way level.

Reason: To provide adequate visibility between the existing highway and the proposed means of access and to make the access safe and convenient for the traffic which is likely to use it.

5) Before the new development is first brought into use, any existing access within the frontage of the land to be developed, not incorporated in the access hereby approved shall be closed in a manner to the Local Planning Authority's written approval.

Reason: In the interest of road safety and to reduce the number of points at which traffic will enter and leave the public highway.

6) The development hereby permitted shall not be carried out except in complete accordance with the details shown on the submitted plans, numbers 2610/15/P/01 and 2610/02/A.

Reason: To identify the approved plan/s and to avoid doubt.

Return to Search | Close Window

Top of Page

Useful information