| Conditions or Reasons for Planning Application - CB/16/03507/FULL |
| Conditions or Reasons: | 1)
The development hereby permitted shall begin not later than three years from the date of this permission.
Reason: To comply with Section 91 of the Town and Country Planning Act 1990 as amended by Section 51 of the Planning and Compulsory Purchase Act 2004. |
2)
All external works hereby permitted shall be carried out in materials to match as closely as possible in colour, type and texture, those of adjacent properties on Hinksley and Catherine Road.
Reason: To safeguard the appearance of the completed development by ensuring that the development hereby permitted is finished externally with materials to match existing dwellings in the interests of the visual amenities of the locality.
(Section 7, NPPF) |
3)
Notwithstanding the provisions of Part 1, Class A of Schedule 2 to the Town and Country Planning (General Permitted Development) Order 2015 (or any order revoking and re-enacting that Order with or without modification), no extensions to the building(s) hereby permitted shall be carried out without the grant of further specific planning permission from the Local Planning Authority.
Reason: To control the external appearance of the building/s in the interests of the amenities of the area.
(Section 7, NPPF) |
4)
Prior to the occupation of any dwelling on the site, a scheme for the provision of waste receptacles for each dwelling shall be submitted to and agreed in writing by the Local Planning Authority. The receptacles shall be provided before occupation takes place.
Reason: In the interest of residential amenity and to reduce waste generation in accordance with the Councils's Minerals and Waste Local Plan 2014, Policy WSP5 and the adopted SPD "Managing Waste in New Developments" (2006). |
5)
Before development of the 'new' dwelling commences, the replacement garage parking with 5.0m length parking space in front shall be constructed.
Reason: For the avoidance of doubt and to provide adequate replacement parking provision clear of the public highway. |
6)
Before the widened access is first brought into use, a triangular vision splay shall be provided on each side of the widened access drive and shall be 2.8m measured along the back edge of the highway from the centre line of the anticipated vehicle path to a point 2.0m measured from the back edge of the highway into the site along the centre line of the anticipated vehicle path. The vision splay so described and on land under the applicant's control shall be maintained free of any obstruction to visibility exceeding a height of 600mm above the adjoining footway level.
Reason: To provide adequate visibility between the existing highway and the widened access, and to make the access safe and convenient for the traffic which is likely to use it. |
7)
The widened vehicular access shall be surfaced in bituminous or other similar durable material (not loose aggregate) for a distance of 5.0m into the site, measured from the highway boundary, before the premises are occupied. Arrangements shall be made for surface water drainage from the site to be intercepted and disposed of separately so that it does not discharge into the highway.
Reason: To avoid the carriage of mud or other extraneous material or surface water from the site into the highway so as to safeguard the interest of highway safety. |
8)
Notwithstanding the provisions of the Town and Country Planning General Permitted Development Order 1995, or any amendments thereto, the replacement garage accommodation on the site shall not be used for any purpose, other than as garage accommodation, unless permission has been granted by the Local Planning Authority on an application made for that purpose.
Reason: To retain off-street parking provision and thereby minimise the potential for on-street parking which could adversely affect the convenience of road users. |
9)
The development hereby permitted shall not be carried out except in complete accordance with the details shown on the submitted plans, numbers atk/16/03/1A; atk/16/MA/tp2A; atk/16/MA/tp4; atk/16/MA/TP6A .
Reason: To identify the approved plans and to avoid doubt. |
|
|---|