| Conditions or Reasons for Planning Application - CB/17/02569/FULL |
| Conditions or Reasons: | 1)
The development hereby permitted shall begin not later than three years from the date of this permission.
Reason: To comply with Section 91 of the Town and Country Planning Act 1990 as amended by Section 51 of the Planning and Compulsory Purchase Act 2004. |
2)
The development hereby approved shall be carried out in strict accordance with the material details shown on drawing number 1017-P2.
Reason: To control the appearance of the building in the interests of the visual amenities of the locality.
(Policies BE8 & NE3, SBLPR & Sections 7 & 11, NPPF) |
3)
Prior to the occupation of the dwelling on the site, a scheme for the provision of waste receptacles for the dwelling shall be submitted to and agreed in writing by the Local Planning Authority. The receptacles shall be provided before occupation takes place.
Reason: In the interest of residential amenity and to reduce waste generation in accordance with the Councils's Minerals and Waste Local Plan 2014, Policy WSP5 and the adopted SPD "Managing Waste in New Developments" (2006). |
4)
No development shall take place until details of the junction of the proposed vehicular access with the highway have been submitted to and approved in writing by the Local Planning Authority. No building shall be occupied until the junction has been constructed in accordance with the approved details.
Reason: In order to minimise danger, obstruction and inconvenience to users of the highway and the premises.
(Section 4, NPPF) |
5)
Before the access is first brought into use, a triangular vision splay shall be provided on each side of the new access drive and shall be 2.8m measured along the back edge of the highway from the centre line of the anticipated vehicle path to a point 2.0m measured from the back edge of the footway into the site along the centre line of the anticipated vehicle path. The vision splay so described and on land under the applicant's control shall be maintained free of any obstruction to visibility exceeding a height of 600mm above the adjoining footway level.
Reason: To provide adequate visibility between the existing highway and the proposed access, and to make the access safe and convenient for the traffic which is likely to use it.
(Section 4, NPPF) |
6)
Visibility splays shall be provided at the junction of the vehicular access with the public highway. The splays shall extend to the limits of the site's highway frontage on each side of the access from a point on the centre line of the access measured 2m back from the road channel. The vision splays so described shall be maintained free of any obstruction to visibility.
Reason: To provide adequate visibility between the existing highway and the proposed access, and to make the access safe and convenient for the traffic which is likely to use it.
(Section 4, NPPF) |
7)
Before the development is first occupied or brought into use, the parking scheme shown on plan no 1017-L3 shall be completed and thereafter retained for this purpose.
Reason: To ensure provision for car parking clear of the highway.
(Section 4, NPPF) |
8)
The development hereby permitted shall not be carried out except in complete accordance with the details shown on the submitted plans, numbers 10117-S1, 1017-L1, 1017-L2, 1017-L3, 1017-L4, 1017-P1, 1017-P2 & 1017-P3.
Reason: To identify the approved plans and to avoid doubt. |
|
|---|