| Conditions or Reasons for Planning Application - CB/18/03698/RM |
| Conditions or Reasons: | 1)
The development hereby permitted shall not be carried out except in complete accordance with the details shown on the submitted plans, numbers JG/2018-02/02A, SRM01 Rev A, JG/2018-02/03A, JG/2018-02/07A, JG/2018-02/05, JG/2018-02/06B, JG/2018-02/04B and Site Location Plan.
Reason: To identify the approved plan/s and to avoid doubt. |
2)
The planting, landscaping scheme shown on approved Drawing No. SRM01 Rev A dated 28/11/18 shall be implemented by the end of the full planting season immediately following the completion and/or first use of any separate part of the development (a full planting season shall mean the period from October to March). The trees, shrubs and grass shall subsequently be maintained for a period of five years from the date of planting and any which die or are destroyed during this period shall be replaced during the next planting season with others of a similar size and species.
Reason: To ensure an acceptable standard of landscaping.
(Sections 12 & 15, NPPF) |
3)
The boundary treatment scheme shown in drawing number SRM01 Rev A shall be constructed in the positions, design, materials and type shown prior to the building being occupied. The boundary treatment shall then be retained thereafter.
Reason: To safeguard the appearance of the completed development and the visual amenities of the locality.
(Section 12, NPPF) |
4)
No above ground development shall take place, until details of the materials to be used for the external walls and roofs of the development hereby approved have been submitted to and approved in writing by the Local Planning Authority. The development shall thereafter be carried out in accordance with the approved details.
Reason: To control the appearance of the building in the interests of the visual amenities of the locality.
(Section 12, NPPF) |
5)
The proposed vehicular access shall be surfaced in bituminous or other similar durable material (not loose aggregate) as may be approved in writing by the Local Planning Authority for a distance of 5.0m into the site, measured from the highway boundary, before the premises are occupied. Arrangements shall be made for surface water drainage from the site to be intercepted and disposed of separately so that it does not discharge into the highway.
Reason
To avoid the carriage of mud or other extraneous material or surface water from the site into the highway so as to safeguard the interest of highway safety. |
6)
The turning space for vehicles illustrated on the approved drawing no. JG/2018-02/02A shall be constructed before the development is first brought into use and thereafter retained for the purpose of a turning area
Reason
To enable vehicles to draw off, park and turn outside the highway limits thereby avoiding the reversing of vehicles on to the highway. |
7)
The first floor window serving an ensuite in the north facing elevation of the development hereby permitted shall be permanently fitted with obscured glass of a type to substantially restrict vision through it at all times and shall be non-opening, unless the parts of the window which can be opened are more than 1.7m above the floor of the room in which the window is installed.
Reason: To safeguard the privacy of occupiers of adjoining properties
(Section 12, NPPF) |
|
|---|