| Conditions or Reasons for Planning Application - CB/21/02999/FULL |
| Conditions or Reasons: | 1)
The development hereby permitted shall begin not later than three years from the date of this permission.
Reason: To comply with Section 91 of the Town and Country Planning Act 1990 as amended by Section 51 of the Planning and Compulsory Purchase Act 2004. |
2)
All external works hereby permitted shall be carried out in materials to match as closely as possible in colour, type and texture, those of the existing building.
Reason: To safeguard the appearance of the completed development by ensuring that the development hereby permitted is finished externally with materials to match the existing building in the interests of the visual amenities of the locality. (Section 12, NPPF) |
3)
Before the development is brought into use details of the widening of the proposed vehicular access with the highway have been approved by the Local Planning Authority and the development shall not be occupied until the widening of the junction has been constructed in accordance with the approved details.
Reason: In order to minimise danger, obstruction and inconvenience to users of the highway and the premises. |
4)
Before the widened access is first brought into use, a triangular vision splay shall be provided on the southern side of the widened access drive and shall be 2.8m measured along the back edge of the highway from the centre line of the anticipated vehicle path to a point 2.0m measured from the back edge of the highway into the site along the centre line of the anticipated vehicle path. The vision splay so described and on land under the applicant's control shall be maintained free of any obstruction to visibility exceeding a height of 600mm above the adjoining footway level.
Reason: To provide adequate visibility between the existing highway and the proposed widened access and to make the access safe and convenient for the traffic which is likely to use it. |
5)
Before the development is occupied all on site vehicular areas shall be surfaced in a stable and durable materials (not loose aggregate) in accordance with details to be approved in writing by the Local Planning Authority. Arrangements shall be made for surface water drainage from the site to soak away within the site so that it does not discharge into the highway or into the main drainage system.
Reason: To avoid the carriage of mud or other extraneous material or surface water from the site so as to safeguard the interest of highway safety and reduce the risk of flooding and to minimise inconvenience to users of the premises and ensure satisfactory parking of vehicles outside highway limits. |
6)
The development hereby permitted shall not be carried out except in complete accordance with the details shown on the submitted plans, numbers 21.106-050.001 Rev P0, 21.106--050.002 Rev P0, 21.106-050.003 Rev P0, 21.106.140.001 Rev P0, 21.106.140.002 Rev P0, 21.106.100.001 Rev P0, 21.106.100.002 Rev P0, 21.106.100.103 Rev P0, 21.106.100.104 Rev P0, 21.106.190.001 Rev P0 and 21.106.190.102 Rev P0.
Reason: To identify the approved plan/s and to avoid doubt. |
|
|---|