Central Bedfordshire Council Planning Pages

Conditions or Reasons for Planning Application - CB/22/04980/VOC

Conditions or Reasons:

1) The development hereby permitted shall not be carried out except in complete accordance with the details shown on the submitted plans, numbers

Supporting Drawings:
1839-22-02-10U - Planning Layout
1839-22-02-11M - Boundary and Materials Plan
1839-22-02-12M - Surface Treatment
1839-22-02-13G - Parking Strategy
1839-22-02-14G - Affordable Housing Plan
1839-22-02-15G - Green Infrastructure Plan
Engineering:
190551-RGL-ZZ-XX-DR-D-101-0001-S2-P09-Proposed Levels Layout
190551-RGL-ZZ-XX-DR-D-105-0001-S2-P06-Proposed Tracking Layout
190551-RGL-ZZ-GF-DR-S-310-0001 - Culvert - General Arrangement_S4-P01
190551-RGL-ZZ-GF-DR-S-310-0002 - Culvert - Apron 1 - Enlarged General Arrangement and Details_S4-P01
190551-RGL-ZZ-GF-DR-S-310-0003 - Culvert - Apron 2 - Enlarged General Arrangement and Details_S4-P01
190551-RGL-ZZ-XX-DR-D-140-0007_S4-P04 Proposed Culvert General Arrangement
Landscaping:
17994D, Astwick Road, Stotfold-Sheet 1 of 3
17994D, Astwick Road, Stotfold-Sheet 2 of 3
17994D, Astwick Road, Stotfold-Sheet 3 of 3
House types:
1839-22-02-100 Shaftesbury Floor Plans and Elevations
1839-22-02-101 Stratford Floor Plans and Elevations

Reason: To identify the approved plan/s and to avoid doubt.

2) No dwelling shall be occupied until cycle storage has been provided and the vehicle parking spaces have been properly surfaced and marked out, provided in accordance with the approved drawing. The spaces shall thereafter be kept available for parking at all times.

Reason: To minimise the potential for on-street parking and thereby safeguard the interest of the safety and convenience of road users.

3) Plots 79-95 shall not be occupied until the ventilation scheme approved under CB/21/2268/DOC - Submitted details of the ventilation system and a noise technical note which confirms the noise levels from the ventilation system in use in habitable rooms:

Vent Note 002 - April 22
250 Acoustic Data Sheet

Has been fully installed in accordance with the approved details. Unless otherwise agreed in writing by the Local Planning Authority.

Reason : To protect the amenity of future occupiers of the dwellings and to safeguard the interests of existing businesses.

4) The LEAP/LAP scheme shall be fully installed on site and maintained in perpetuity prior to the 1st occupation of any of the dwellings as set out in accordance with plan 18031 E approved under reference CB/21/00929/DOC.

Reason: The details submitted with the reserved matters application did not fully conform with the Central Bedfordshire Design Guide.

5) The site levels and finished floor levels shall be carried out in accordance with the approved plan:

190551-RGL-ZZ-XX-DR-D-101-0004-A-C01-Proposed Detailed Levels
190551-RGL-ZZ-XX-DR-D-101-0002-A-C01-Proposed Detailed Levels
190551-RGL-ZZ-XX-DR-D-101-0003-A-C01-Proposed Detailed Levels

Approved under CB/21/00929/DOC.

Reason: For the avoidance of doubt, to ensure satisfactory relationship between dwellings on site, and surrounding development.

6) The rear boundary treatment of plots 1-11 hereby approved shall be a closed boarded 1.8 metre high fence.

Reason: For the avoidance of doubt.

Return to Search | Close Window

Top of Page

Useful information