| Details of Planning Application -
CB/18/04151/LB |
| Application registered | Consultation period | Awaiting decision | Decided | Appeal | Appeal decided |
|
|---|
| Application Type: | Listed Building |
|---|
| Date Received: | 06
/
11
/
2018 |
|---|
| Registration (Validation) Date: | 06
/
11
/
2018 |
|---|
| Consultation Start Date: | 06
/
11
/
2018 |
|---|
| Earliest Decision Date (Consultation Period Expires): | 25
/
12
/
2018 |
|---|
| Target Date for Decision: | 01
/
01
/
2019 |
|---|
| Location: | 129 High Road, Shillington, Hitchin, SG5 3LU |
|---|
| Parish Name: | Shillington |
|---|
| Conservation Area: | Apsley End - Shillington |
|---|
| Listed Building Grade: | Ecclesiastical Two |
|---|
| Environmental Assessment: | Not available |
|---|
| Expected Decision Level: | Not available |
|---|
| Description: | Listed Building: Single storey side extension and demolition of existing flat roof garage block and construction of new garage with office. |
|---|
| Case Officer: | Matt Cranitch |
|---|
| Case Officer Tel: | 0300 300 6245 |
|---|
| Case Officer Email: | matt.cranitch@centralbedfordshire.gov.uk |
|---|
| Status: | Decided |
|---|
| Agent: | Peter J Farmer RIBA |
|---|
| 32 Church Street |
|---|
| Shillington |
|---|
| Beds |
|---|
| SG5 3LJ |
|---|
| Press Date: | 23
/
11
/
2018 |
|---|
| Site Notice Date: | 27
/
11
/
2018 |
|---|
| Neighbours | Responses Received:
1 |
|---|
| and Representatives: | In Favour:
1 |
|---|
| Representation Details | Against:
0 |
|---|
| Comments:
0 |
|---|
| Petitions Against:
0 |
|---|
| Petitions For:
0 |
|---|
| Officer Site Visit Date: | 27/11/2018 |
|---|
| Committee Site Visit Date: | No date |
|---|
| Committee Meeting Date: | No date |
|---|
| Decision Level: | Officer Delegated |
|---|
| Date Decision Made: | 11
/
01
/
2019 |
|---|
| Date Decision Despatched: | 11
/
01
/
2019 |
|---|
| Decision: | Listed Building - Granted |
|---|
| Conditions or Reasons: | View Conditions or Reasons |
|---|
| Informative Notes: | | Materials and finishes
Weatherboard cladding - To assist in the correct selection of external materials and
finishes, both applicant and applicant's agent should be advised of the traditional standard
dimensions for traditional weatherboard, namely 175mm (7') board width with sectional
thicknesses of 25mm (1') at the lower, exposed edge, tapering down to 6mm (1/4') at the
top edge.
Black stain or black tar paint are both acceptable finishes.
Window and door joinery a paint, not stain, finish is accepted best practice. Hardwood
framing (oak, elm) may be either painted or left to weather naturally. Softwood should
always be painted, and for window and door insertions a gloss black finish, or 'Heritage
Range' pastel green or grey finish, is the most effective colour finish to convey the muted
paint finishes typical of traditional outbuildings.Materials and finishes
Weatherboard cladding - To assist in the correct selection of external materials and
finishes, both applicant and applicant's agent should be advised of the traditional standard
dimensions for traditional weatherboard, namely 175mm (7') board width with sectional
thicknesses of 25mm (1') at the lower, exposed edge, tapering down to 6mm (1/4') at the
top edge.
Black stain or black tar paint are both acceptable finishes.
Window and door joinery a paint, not stain, finish is accepted best practice. Hardwood
framing (oak, elm) may be either painted or left to weather naturally. Softwood should
always be painted, and for window and door insertions a gloss black finish, or 'Heritage
Range' pastel green or grey finish, is the most effective colour finish to convey the muted
paint finishes typical of traditional outbuildings. |
|
|---|
| Appeal Received Date: | This case has no appeals against it |
|---|
| Planning Obligation Status: | Not available |
|---|