Central Bedfordshire Council Planning Pages

Conditions or Reasons for Planning Application - CB/20/04083/FULL

Conditions or Reasons:

1) The use(s) hereby permitted shall be discontinued and all structures (if any) removed on or before 31st January 2022 unless before that date the Local Planning Authority has granted planning permission for its (their) continuation.

Reason: To allow the Local Planning Authority to review the use(s) when the permission expires.
(Section 12, NPPF)

2) The development hereby permitted shall not be carried out except in complete accordance with the details shown on the submitted plans, numbers 32'x10' AP Drying; 32'x10' AP Office; 32'x10' AP Canteen; 150-5014 Rev 00; UG2770; HE551495-SKA-GEN-SECT2-CONW-DR-AX-00?? rev C01; HE551495-SKA-GEN-SECT2-CONW-DR-AX-0002 rev C04; and HE551495-SKA-GEN rev P02

Reason: To identify the approved plan/s and to avoid doubt.

3) The temporary access road hereby permitted shall only be used by traffic in connection with the required archaeological investigation and for no other purpose, including any other works associated with the A428 Improvement Scheme (Black Cat to Caxton Gibbet).

Reason: In order to minimise the impact of construction work on the amenities of nearby residential properties (Section 12, NPPF)

4) The development hereby permitted shall be undertaken in full accordance with the Councils adopted Construction Code of Practice for Developers and Contractors https://www.centralbedfordshire.gov.uk/info/44/planning/674/codes_of_practice_for_planning.

Reason: In order to minimise the impact of construction work on the amenities of nearby residential properties (Section 12, NPPF)

5) The development hereby permitted shall be undertaken in full accordance with the Councils adopted Environmental Code of Practice https://www.centralbedfordshire.gov.uk/info/44/planning/674/codes_of_practice_for_planning/3

Reason: In order to minimise the impact of development on existing trees, landscape features and biodiversity (Section 15, NPPF)

6) A fence shall be erected no less than 6m from the position of the high-pressure gas pipeline to demarcate an exclusion zone and prevent the encroachment of works within this exclusion zone. The fence type and position shall be agreed with Cadent Gas and erected prior to the commencement of any work hereby permitted.

Reason: In the interest of Gas Safety and to ensure a satisfactory standard of development.

Return to Search | Close Window

Top of Page

Useful information